PureThermal 3: The Hackable Thermal Webcam for the FLIR Lepton

 You may be familiar with the popular PureThermal 2 thermal webcam, but GroupGets just released its successor: the PureThermal 3. This webcam is hackable, so you can create your own custom thermal applications using the FLIR Lepton (2.x - 3.x and FS) LWIR camera core. It has the same basic functionality as the PT2 but with a few changes and additional features.

Unlike the PT2, the PT3 does not have pads to install an RF shield and the Tag-Connect TC2030 programming connector is replaced by the Tag-Connect EC-10-IDC. This makes it easier to use if you don't need to install an RF shield, and it also allows for future firmware updates over USB.

We think the PT3 is a great choice for anyone looking for a hackable thermal webcam, and we're excited to see what new applications people will create with it.

PureThermal 3 Introduction

The PureThermal 3 (PT3) is a hackable thermal webcam for the FLIR Lepton (2.x - 3.x and FS) LWIR camera core. It has the same basic functionality as the PureThermal 2 but with a few changes and additional features. Unlike the PT2, the PT3 does not have pads to install an RF shield and the Tag-Connect TC2030 programming connector is replaced by the Tag-Connect EC-10-IDC.

PureThermal 3 Features

The PT3 is hackable, which means you can customize it to your needs. It has the same basic functionality as the PT2, but with a few changes and additional features.

For example, the PT3 does not have pads to install an RF shield and the Tag-Connect TC2030 programming connector is replaced by the Tag-Connect EC-10-IDC. This makes it easier to connect to the Lepton camera core.

The PT3 is also compatible with the FLIR Lepton 3.x and FS camera cores, giving you even more flexibility in terms of customization.

Get Started with PureThermal 3

So you've just got your hands on a PureThermal 3 and you're wondering how to hack it? Well, wonder no more!

The first thing you'll need to do is remove the four screws that hold the lid in place. Then, you can gently pry the lid off and remove the PCB.

Once you have the PCB out of the housing, you can start to explore! The PT3 is based on the FLIR Lepton 2.x - 3.x and FS camera cores, so there are a lot of exciting things to play with.

There are three ways to hack the PT3: via I2C, SPI, or UART. For more information, check out the PT3 datasheet. Have fun!

PureThermal 3 Applications

best applications for the PureThermal 3

Well, that all depends on what you want to use it for. The PT3 is perfect for thermal imaging, capturing heat signatures and seeing in the dark. It's also great for security and surveillance because you can see who or what is lurking in the shadows.

But that's not all. The PT3 can also be used for scientific research, agricultural analysis, and a whole bunch of other things. Really, the possibilities are endless. So what are you waiting for? Get yourself a PureThermal 3 and see what you can do with it!

PureThermal 3 Needs?

So, you're interested in getting a PureThermal 3? That's great! But before you pull the trigger, there are a few things you need to consider.

First of all, what are your needs? What kind of projects will you be using the PT3 for? If you need something for industrial applications, you'll want to go for the PT3-Pro. If you're just starting out, the PT3-Basic might be a good option for you.

Next, decide which FLIR Lepton camera core you need. The PureThermal 3 supports both the 2. x and 3. x versions, as well as the new FLIR Lepton FS. Make sure to check which version of the Lepton camera core your FLIR thermal camera uses.

Then there's the issue of compatibility. The PT3 is only compatible with the Tag-Connect TC2030 programming connector. You'll need to get an adapter if your thermal camera has a different connector.

Finally, think about your budget. The PureThermal 3 isn't cheap, but it's worth the investment if you're serious about thermal imaging. So weigh your options and decide which PT3 is right for you!

Choosing PureThermal 3

The PureThermal 3 is a great thermal webcam option for anyone looking to hack their FLIR Lepton camera core. It has the same basic functionality as the PureThermal 2, but with a few additional features that make it a great choice for any hacker or DIY enthusiast.

The PT3 does not have pads to install an RF shield, but it does come with the Tag-Connect TC2030 programming connector, making it easy to connect and program. It also has a built-in micro SD card slot, which allows you to store images and videos directly on the camera.

So if you're looking for a thermal webcam that you can easily hack and customize, the PureThermal 3 is a great option.

Conclusion

If you are looking for a thermal webcam that you can hack and modify to your needs, the PureThermal 3 is a perfect choice. With its built-in programming connector, you can easily add new features or change the way it works.

The PT3 is also a great choice if you need a thermal webcam that is compatible with the FLIR Lepton LWIR camera core. It has the same basic functionality as the PT2, but with a few changes and additional features.

So, if you're looking for a thermal webcam that you can customize to your needs, the PureThermal 3 is a perfect choice.